The B-Lift 510 High Range European tour ends happily in Turkey

The B-Lift 510 HR On & Up Tour ends with the sale of the platform to a turkish customer

The 2 months CTE – Road Show of B-Lift 510 High Range is finished. The most important places for the CTE market and the visits to the CTE dealers in the Netherlands, Belgium, Germany and Switzerland were reached for a total of more than 3000 km.

At the end of the tour, with satisfaction of CTE, the platform restarts immediately to Turkey, for the final destination: the CTE Turkish customer Katmerciler, based in Izmir. For more information on Katmerciler:

The success of the Tour has brought other sale: another example of B-Lift 510 High Range in fact has recently been delivered in Italy, and this goes to underline the great future that lies ahead for this platform.

Characterized by a strong minimalist design combined with the latest generation technology, has become a flag for CTE for driving license C. It reaches a height of 50.5 m working on three-axle vehicle from 26tons. HR is for High Range, the largest engineering project launched a few years ago by the CTE Technical Dept. based in Bertinoro with the aim of creating a range to satisfy the needs of three different markets with different specificities like the European industrial market, the American market and the fire-prevention market.

The B-Lift HR 510 has the great advantage of including in the standard configuration the working area according to the position of the outrigger with an outreach of over 34 m, with a maximum capacity of 450 kg basket. Performance of all relief that is combined with the compactness of the vehicle, about 10 m in length.
The B-Lift 510 HR has a telescopic boom with four elements (boom + three extensions), with simultaneous telescopic output and without external encumbrance. In addition, there’s a main jib extra-long with double extension combined to a secondary jib at 180 degrees (enhanced by the control system and automatic self-motion). The hydraulic and electrical power supplies are housed in a cable carrier inside the boom and the jib.
The electro-hydraulic controls are proportional to the basket and ground simultaneous maneuvers. The starting and stopping the vehicle engine is from command posts in the basket and ground.
The dynamics of the platform include a rotating turret 570 ° on ball bearing motor with brake and negative. The drum rotation is accomplished with hydraulic actuator to 180 ° (90 ° right + 90 ° left).